Job description

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. JOB SUMMARY - ESSENTIAL FUNCTIONS The Radar Test and Analysis Engineer will work primarily within research and development engineering groups with responsibility for a wide variety of tasks. The primary tasking will be a variety of testing tasks using radars. We are looking for engineers with entry to master level skill sets who work well in both theoretical and practical domains as part of an iterative process to create innovative solutions for a multitude of relevant domain challenges as partially described below. Employee will be responsible for the following functions/duties: • Perform analysis of test data, including signal post-processing and/or noise levels, visualization, and comparison with modeled data, expected values, and/or mission criteria. • Analysis and visualization of large, compiles datasets MATLAB, Python and other related tools. • Understand and apply the radar range equation. • Work independently on multiple tasks. • Calculate RF link budgets and expected interference levels for various test scenarios and geometries. • Determine specific radar and other technical data which must be made available and collected to satisfy specified mission requirements. • Develops physics-based models of RF systems. • Develop comprehensive test plans, test reports, and presentations. • Perform RF signal analysis. • Track known radar data over time to statically determine the health of various radar systems and components. • Convey complex radar-related information in both written and spoken form for personnel with limited domain knowledge. • Determine, understand, and evaluate which signal processing techniques and algorithms are used to process radar returns. • Perform other job-related duties, as required Desired Qualifications • Major or Minor in EE or Physics • Aptitude for learning on the job • Familiarity with radar signal processing/algorithms (including, but not limited to, CFAR/detection, False Alarm Rate (FAR), waveform/PRF selection, range resolution, scheduling/resource management, trackers, Kalman filters, optimization, etc.) • Basic understanding of all components of the radar range equation • Basic understanding of RF, antennas, and/or electromagnetic wave propagation and interaction (antenna theory, RF Sensors, RF front end architectures, signal and digital processing, and sensing modalities or a combination of the above skills and a willingness to deepen expertise) • MATLAP and/or Python: Proficiency (tool development, scripting, code review, etc.) • Experience in RF sensor data analysis, signal processing, or related radar/defense work In addition, in a general sense, there may also be other assignments available in planning, performing, and overseeing research, design, development, production, testing, installation, integration, sustainment, operation, and maintenance of radar equipment used for radar testing. The Radar Test and Analysis Engineer may also independently perform a range of design, development, analysis, or review tasks under generally established project deadlines. REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE Note: The position may be filled at any of the disciplines/levels listed below. Engineer: Applicants must have an engineering degree from an ABET-accredited program. US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required. Applicants must have a valid, state-issued driver's license. Minimum requirements/experience for each level Engineer listed below: Engineer I: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution. Engineer II : The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution with 2 years of related engineering experience, or have an accredited Master of Science in Engineering. Engineer III: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience, or have an accredited doctoral degree in Engineering. Engineer IV: The candidate must have a Bachelor of Science in Engineering from and ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience. Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience. Engineer VI: The candidate must have a Master of Science in Engineering from an ABET-accredited academic institution and 16 years of related engineering experience, or an accredited doctorate degree in engineering and a minimum of 12 years of related engineering experience. Ops/Test Analyst Applicants must understand concepts, principles, and practices of engineering and analysis to enable employee to serve as a technical authority of projects relating to specific programs. US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required. Applicants must have a valid, state-issued driver's license. Minimum requirements/experience for each level Ops/Test Analyst is listed below: Ops/Test Analyst I: Completion of technical training and 4 years of related experience; or an associate degree and 2 years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics). Ops/Test Analyst II: Completion of technical training and 7 years of related experience; or an associate degree and 4 years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and 2 years of related experience; or a related master's degree. Ops/Test Analyst III: Completion of technical training and at least 10 years of related experience; or an associate degree and 7 years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and 4 years of related experience; or a related master's degree and 4 years of related experience. Ops/Test Analyst IV: Completion of technical training and at least 14 years of related experience; or an associate degree and 11 years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and 8 years of related experience; or a related master's degree and 8 years of related experience. Ops/Test Analyst V: Completion of technical training and at least 20 years of related experience; or an associate degree and 16 years of related experience; or a related bachelor's degree (engineering, math, computer science, or physics) and 14 years of related experience; or a related master's degree and 10 years of related experience. Ops/Test Analyst VI: Bachelor's degree in a related field (engineering, math, computer science, or physics) and 20 years of related experience; master's degree and 16 years of related experience. BENEFITS • Medical, Dental, Vision Insurance • Benefits Active on Day 1 • Life Insurance • Health Savings Accounts/FSA’s • Disability Insurance • Paid Time Off • 401(k) Plan Options with Employer Match • JT4 will match 50%, up to an 8% contribution • 100% Immediate Vesting • Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards. Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required. Travel to remote company work locations may be required. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17, JOTDA18; JCORP12

Requirements

Must-haves

Employee will be responsible for the following functions/duties:
Perform analysis of test data, including signal post-processing and/or noise levels, visualization, and comparison with modeled data, expected values, and/or mission criteria.
Analysis and visualization of large, compiles datasets MATLAB, Python and other related tools.
Understand and apply the radar range equation.
Work independently on multiple tasks.
Calculate RF link budgets and expected interference levels for various test scenarios and geometries.
Determine specific radar and other technical data which must be made available and collected to satisfy specified mission requirements.
Develops physics-based models of RF systems.
Develop comprehensive test plans, test reports, and presentations.
Perform RF signal analysis.
Track known radar data over time to statically determine the health of various radar systems and components.
Convey complex radar-related information in both written and spoken form for personnel with limited domain knowledge.
Determine, understand, and evaluate which signal processing techniques and algorithms are used to process radar returns.
Perform other job-related duties, as required
Engineer I: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution.
Ops/Test Analyst
Ops/Test Analyst VI: Bachelor's degree in a related field (engineering, math, computer science, or physics) and 20 years of related experience; master's degree and 16 years of related experience.

Nice-to-haves

Major or Minor in EE or Physics
Aptitude for learning on the job
Basic understanding of all components of the radar range equation
MATLAP and/or Python: Proficiency (tool development, scripting, code review, etc.)
Experience in RF sensor data analysis, signal processing, or related radar/defense work
REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE
Note: The position may be filled at any of the disciplines/levels listed below.

Application prep

Use the role’s language and application details while tailoring your materials.

Keywords to mirror

python

Platform: adp-recruiting
Effort: medium

Benefits

Benefits detected in the listing.

Dental

Vision

401(K)

Paid Time Off