Job description

ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. LEAD ENGINEER, TOOLING DESIGN AND SUPPORT We are currently seeking a Lead Engineer for our Tooling, Test, and Infrastructure team based out of Rocket Lab's newest Space Structures Complex production facility in Middle River, MD. The Lead Engineer will be responsible for the development, implementation, and continuous improvement of tooling, GSE, and test for the Neutron Launch Vehicle.  WHAT YOU’LL GET TO DO:   Manage a team of Engineers responsible for tooling, GSE, and test for Neutron Coordinate a team focused on: Production tooling: how we massively scale the production of Neutron and create mechanical tools which allow us to increase assembly accuracy, reduce set-up times, minimize crane use, etc. Ground Support Equipment: design of equipment that interfaces with the vehicle for test, transport, and integration Test: engineering coordination of qual tests and structural tests. Coordinate with structures team, other Lead Engineers, facilities, operations, and other major stakeholders to: Manage facility-wide constraints Develop appropriate training plans to ensure technicians are qualified to perform the expected tasks Major capital projects to introduce new production techniques as we scale production Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc. In addition, the Lead Engineer will perform the following tasks in a leadership capacity: Develop and mentor less experienced engineers and technicians Ensure robust planning, including project schedules Performance management for engineers on the team Recruiting where needed for additional engineers YOU’LL BRING THESE QUALIFICATIONS:   Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree. 5 + years of engineering design experience.  Experience in a leadership position. THESE QUALIFICATIONS WOULD BE NICE TO HAVE:   Demonstrated experience with large tooling and structures design  Working knowledge of Siemens NX/Teamcenter     Familiarity with manufacturing processes such as metallic machining, welding, and fabrication. Experience with structural analysis including hand calcs and FEA Ability to read and interpret P&ID’s and wiring diagrams. Demonstrated leadership competencies, especially change management, conflict resolution, knowing when to escalate / request help, effectively manage a team ADDITIONAL REQUIREMENTS Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion. Base Pay Range (MD Only) $115,000 — $187,850 USD WHAT TO EXPECT We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com. This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Requirements

Must-haves

Manage a team of Engineers responsible for tooling, GSE, and test for Neutron
Production tooling: how we massively scale the production of Neutron and create mechanical tools which allow us to increase assembly accuracy, reduce set-up times, minimize crane use, etc.
Ground Support Equipment: design of equipment that interfaces with the vehicle for test, transport, and integration
Test: engineering coordination of qual tests and structural tests.
Coordinate with structures team, other Lead Engineers, facilities, operations, and other major stakeholders to:
Manage facility-wide constraints
Develop appropriate training plans to ensure technicians are qualified to perform the expected tasks
Major capital projects to introduce new production techniques as we scale production
Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc.
In addition, the Lead Engineer will perform the following tasks in a leadership capacity:
Develop and mentor less experienced engineers and technicians
Ensure robust planning, including project schedules
Performance management for engineers on the team
Recruiting where needed for additional engineers
Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.
5 + years of engineering design experience.
Experience in a leadership position.
Demonstrated experience with large tooling and structures design
Working knowledge of Siemens NX/Teamcenter
Familiarity with manufacturing processes such as metallic machining, welding, and fabrication.
Experience with structural analysis including hand calcs and FEA
Ability to read and interpret P&ID’s and wiring diagrams.
Demonstrated leadership competencies, especially change management, conflict resolution, knowing when to escalate / request help, effectively manage a team
Sit at desk and operate computer, keyboard and office equipment for extended periods

Nice-to-haves

None flagged.

Application prep

Use the role’s language and application details while tailoring your materials.

Platform: greenhouse
Effort: quick

Benefits

Benefits detected in the listing.

Dental

Vision

401(K)

Parental Leave