Job description

Join us in pioneering breakthroughs in healthcare. For everyone. Everywhere. Sustainably. Our inspiring and caring environment forms a global community that celebrates diversity and individuality. We encourage you to step beyond your comfort zone, offering resources and flexibility to foster your professional and personal growth, all while valuing your unique contributions. The Compliance Test Engineer executes and documents EMC, product safety, and environmental testing in an accredited laboratory environment. This role is hands-on and is primarily responsible for the execution, technical integrity, troubleshooting, and documentation of compliance testing for complex in-vitro diagnostic instrumentation and electrical equipment. The ideal candidate brings deep laboratory testing experience, strong technical judgment, and the ability to produce defensible test records in a regulated, accredited environment. Key Responsibilities: • Execute and document EMC, product safety, and environmental testing in accordance with approved test plans, test contracts, laboratory procedures, work instructions, and quality system requirements. • Perform test setup, execution, and reporting to applicable standards, including the IEC 61326, IEC 61010, IEC 60601, and IEC 60068 series and related national and international requirements. • Execute conducted emissions, radiated emissions, conducted immunity, radiated immunity, ESD, EFT/burst, surge, magnetic immunity, and voltage dips and short interruptions testing. • Prepare high-quality test data, worksheets, photographs, setup records, reports, and data packages suitable for design verification, certification, and audit review. • Maintain test-article identification, configuration control, and sample traceability, and record any changes that could affect the validity of test results. • Set up, operate, verify, troubleshoot, and maintain EMC, product safety, and environmental test equipment, and support calibration, verification, and equipment-status activities. • Support the installation, movement, setup, troubleshooting, and removal of instruments, test articles, fixtures, and auxiliary equipment within the test environments. • Identify failure mechanisms, support EMC mitigation and product safety troubleshooting during development and test cycles, and recommend technically defensible corrective actions. • Recognize deviations, questionable results, equipment issues, and nonconforming work, and escalate or stop work when the validity, safety, or quality of testing may be compromised. • Collaborate with the Compliance Project Engineer, STL Technical Lead, Quality/Compliance Engineer, and cross-functional engineering teams to resolve test issues and meet project commitments. • Participate in cross-training and structured knowledge transfer, including capture of technical methods and lessons learned from experienced laboratory personnel. • Contribute to continuous improvement of laboratory procedures, documentation, test methods, and efficiency. • Perform additional laboratory and project responsibilities as assigned by the Senior Manager based on demonstrated competency, workload, and organizational needs. Desired Skills for Success in this role: • Bachelor's Degree in Engineering or related technical field preferred or Associate Degree in Electrical or Engineering Technology or related field or equivalent technical training and experience. • Prior experience in an accredited EMC, product safety, or environmental testing laboratory, or in a regulated product-development environment. • Experience troubleshooting compliance failures and recommending practical design or setup corrective actions. • Familiarity with ISO/IEC 17025, IECEE CTF programs, and internal, customer, and external auditing processes. • Experience mentoring junior engineers or technicians in a laboratory environment. • Continuous learning mindset with a strong commitment to data integrity and quality deliverables. Required skills for the success in this role: • Minimum of 5 years of related laboratory, compliance, test, electrical, or product-development experience. • Strong working knowledge of the IEC 61326 and IEC 61010 series, or the IEC 60601 series. • Hands-on experience with EMC test setups, instrumentation, and mitigation and troubleshooting techniques. • Proficiency operating spectrum analyzers, oscilloscopes, and other EMC and product safety instrumentation. • Ability to read electrical schematics, component specifications, and mechanical drawings, and to make circuit board modifications and wiring harness changes. • Excellent written and verbal communication skills, with experience producing formal technical documentation. • Proficiency in Microsoft Office applications and the ability to learn laboratory document and record-management systems. Work Environment and Expectations: Full-time, onsite role located in Newark, Delaware. The position operates in a hands-on laboratory environment involving test equipment, fixtures, and instrumentation, and requires a certain level of manual labor. Domestic travel is expected to be 10 percent or less, and willingness to work overtime when needed is required. Who we are : We are a team of more than 72,000 highly dedicated Healthineers in more than 70 countries. As a leader in medical technology, we constantly push the boundaries to create better outcomes and experiences for patients, no matter where they live or what health issues they are facing. Our portfolio is crucial for clinical decision-making and treatment pathways. How we work: When you join Siemens Healthineers, you become one in a global team of scientists, clinicians, developers, researchers, professionals, and skilled specialists, who believe in each individual’s potential to contribute with diverse ideas. We are from different backgrounds, cultures, religions, political and/or sexual orientations, and work together, to fight the world’s most threatening diseases and enable access to care, united by one purpose: to pioneer breakthroughs in healthcare. For everyone. Everywhere. Sustainably. To find out more about Siemens Healthineers businesses, please visit our company page here . The base pay range for this position is: $98,140 - $134,937 Factors which may affect starting pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate. If this is a commission eligible position the commission eligibility will be in accordance with the terms of the Company's plan. Commissions are based on individual performance and/or company performance. The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan. life insurance, long-term and short-term disability insurance, paid parking/public transportation, paid time off, paid sick and safe time. Equal Employment Opportunity Statement: Siemens Healthineers is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. To learn more, click here . Reasonable Accommodations: Siemens Healthineers is committed to equal employment opportunity. As part of this commitment, we will ensure that persons with disabilities are provided reasonable accommodations. If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form here . If you’re unable to complete the form, you can reach out to our HR People Connect People Contact Center for support at peopleconnectvendorsnam.func@siemens-healthineers.com. Please note HR People Connect People Contact Center will not have visibility of your application or interview status. California Privacy Notice: California residents have the right to receive additional notices about their personal information. To learn more, click here . Export Control: “A successful candidate must be able to work with controlled technology in accordance with US export control law.” “It is Siemens Healthineers’ policy to comply fully and completely with all United States export control laws and regulations, including those implemented by the Department of Commerce through the Export Administration Regulations (EAR), by the Department of State through the International Traffic in Arms Regulations (ITAR), and by the Treasury Department through the Office of Foreign Assets Control (OFAC) sanctions regulations.” Data Privacy: We care about your data privacy and take compliance with GDPR as well as other data protection legislation seriously. For this reason, we ask you not to send us your CV or resume by email. We ask instead that you create a profile in our talent community where you can upload your CV. Setting up a profile lets us know you are interested in career opportunities with us and makes it easy for us to send you an alert when relevant positions become open. Register here to get started. Beware of Job Scams: Please beware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as Siemens Healthineers recruiters/employees. These scammers may attempt to collect your confidential personal or financial information. If you are concerned that an offer of employment with Siemens Healthineers might be a scam or that the recruiter is not legitimate, please verify by searching for the posting on the Siemens Healthineers career site. To all recruitment agencies: Siemens Healthineers does not accept agency resumes. Please do not forward resumes to our jobs alias, employees, or any other company location. Siemens Healthineers is not responsible for any fees related to unsolicited resumes.

Requirements

Must-haves

Join us in pioneering breakthroughs in healthcare. For everyone. Everywhere. Sustainably.
Execute and document EMC, product safety, and environmental testing in accordance with approved test plans, test contracts, laboratory procedures, work instructions, and quality system requirements.
Perform test setup, execution, and reporting to applicable standards, including the IEC 61326, IEC 61010, IEC 60601, and IEC 60068 series and related national and international requirements.
Execute conducted emissions, radiated emissions, conducted immunity, radiated immunity, ESD, EFT/burst, surge, magnetic immunity, and voltage dips and short interruptions testing.
Prepare high-quality test data, worksheets, photographs, setup records, reports, and data packages suitable for design verification, certification, and audit review.
Maintain test-article identification, configuration control, and sample traceability, and record any changes that could affect the validity of test results.
Set up, operate, verify, troubleshoot, and maintain EMC, product safety, and environmental test equipment, and support calibration, verification, and equipment-status activities.
Support the installation, movement, setup, troubleshooting, and removal of instruments, test articles, fixtures, and auxiliary equipment within the test environments.
Identify failure mechanisms, support EMC mitigation and product safety troubleshooting during development and test cycles, and recommend technically defensible corrective actions.
Recognize deviations, questionable results, equipment issues, and nonconforming work, and escalate or stop work when the validity, safety, or quality of testing may be compromised.
Collaborate with the Compliance Project Engineer, STL Technical Lead, Quality/Compliance Engineer, and cross-functional engineering teams to resolve test issues and meet project commitments.
Participate in cross-training and structured knowledge transfer, including capture of technical methods and lessons learned from experienced laboratory personnel.
Contribute to continuous improvement of laboratory procedures, documentation, test methods, and efficiency.
Perform additional laboratory and project responsibilities as assigned by the Senior Manager based on demonstrated competency, workload, and organizational needs.
Prior experience in an accredited EMC, product safety, or environmental testing laboratory, or in a regulated product-development environment.
Experience troubleshooting compliance failures and recommending practical design or setup corrective actions.
Familiarity with ISO/IEC 17025, IECEE CTF programs, and internal, customer, and external auditing processes.
Experience mentoring junior engineers or technicians in a laboratory environment.
Continuous learning mindset with a strong commitment to data integrity and quality deliverables.
Required skills for the success in this role:
Minimum of 5 years of related laboratory, compliance, test, electrical, or product-development experience.
Strong working knowledge of the IEC 61326 and IEC 61010 series, or the IEC 60601 series.
Hands-on experience with EMC test setups, instrumentation, and mitigation and troubleshooting techniques.

Nice-to-haves

Bachelor's Degree in Engineering or related technical field preferred or Associate Degree in Electrical or Engineering Technology or related field or equivalent technical training and experience.

Application prep

Use the role’s language and application details while tailoring your materials.

Platform: phenom
Effort: medium

Benefits

Benefits detected in the listing.

Dental

Vision

401(K)

Paid Time Off