Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. PROPULSION ENGINEER (RAPTOR TEST) The propulsion engineer is responsible for ensuring Raptor engines and components have been tested and qualified to function in flight conditions. Our engineers specialize in the design and execution of unique development tests for Raptor engine testing on an accelerated schedule. This role offers a constant variety of diverse engineering challenges in a fast-paced, hands-on environment. Raptor Test Engineers have the opportunity to work on one of the world’s most complex engines to date, a full flow staged combustion engine! Join the team and our journey to Mars and we solve new challenges presented by unknown frontiers. RESPONSIBILITIES: Develop and execute tests at the engine and component level to evaluate hardware performance and survivability during the mission. Repeated ownership of test campaigns; including test plan creation, new system activation, test operations, data review, and test stand equipment design/fabrication. Provide daily direction and instruction to technicians to fabricate and integrate test articles and stand equipment. Develop and maintain test procedures, sequences, scripts, configuration files, and software. Operate and troubleshoot data acquisition and control systems, wiring, and instrumentation. DAQ systems are primarily National Instruments based. Operate and troubleshoot fluid and mechanical systems that include low to high-pressure gaseous working fluids and rocket propellants (including high pressure nitrogen and methane systems & cryogenics) as well as structural components and supporting infrastructure. Operate mechanical systems; these include test stand support structures, heat exchangers, vacuum pumps, tooling, and fluid components such as valves, reliefs, burst disks, tubing, etc. Automate repetitive test operations to increase efficiency and safety. Develop innovative processes to increase testing capability and rates, while maintaining high rigor of safety. Identify and characterize system pitfalls and potential hazards then work to resolve such anomalies by collaborating with design engineers on improvements for test stands and flight hardware. Operate test console and direct a team of technicians to execute test processes. Analyze and review data to ensure that hardware is operating as expected utilizing numerical data analysis tools to interpret test results. Develop, maintain, and execute integration and testing process, and collaborate with design engineers to improve hardware. Act as a conduit for completing the resource management process, including: planning, parts, coordination, skilled labor coordination, process verification, etc. BASIC QUALIFICATIONS: Bachelor’s degree in an engineering discipline 1+ years of hands-on testing experience (experience from internships, clubs or other hands-on extra-curricular activities qualifies) PREFERRED SKILLS AND EXPERIENCE: Master’s degree in Mechanical or Aerospace Engineering or equivalent experience Experience in production and test systems Hands on test and production facility, factory, or laboratory experience Mechanical aptitude and experience Demonstrated experience where quick-thinking and problem solving plays a critical role Knowledge and/or experience in aerospace structural or mechanical or propulsion systems assembly and testing Ability to utilize test instrumentation and control components: pressure transducers, thermocouples, RTDs, strain gauges, accelerometers, flow meters, load cells, relays, solenoid valves Ability to solve problems calling for technical analysis Ability to read and understand technical manuals and reports Ability to read and understand mechanical and electrical schematics Knowledge of hazardous systems- cryogenic, flammable, hypergolic, pyrophoric Knowledge of high pressure system design and handling Experience using test instrumentation and control components Windows Operating Systems, Intermediate skill level Microsoft Office (Excel, PowerPoint, Word, Outlook, OneNote), Intermediate skill level CAD modeling (Unigraphics NX preferred) and Teamcenter, Novice skill level Programming Languages (Python, C/C++, SQL), Novice-Intermediate skill level ADDITIONAL REQUIREMENTS: Flight hardware is typically built in tight quarters and physical dexterity is required Physical effort including sitting or standing for extended periods of time, lifting and carrying weight such as materials or equipment (up to 25 lbs. unassisted) Work performed in an environment with exposure to fumes, odors and noise Occasionally exposed to work in extreme outdoor environments (heat, cold, rain) Hours vary depending on site operational needs; flexibility required ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com .

Requirements

Must-haves

Develop and execute tests at the engine and component level to evaluate hardware performance and survivability during the mission.
Repeated ownership of test campaigns; including test plan creation, new system activation, test operations, data review, and test stand equipment design/fabrication.
Provide daily direction and instruction to technicians to fabricate and integrate test articles and stand equipment.
Develop and maintain test procedures, sequences, scripts, configuration files, and software.
Operate and troubleshoot data acquisition and control systems, wiring, and instrumentation. DAQ systems are primarily National Instruments based.
Operate mechanical systems; these include test stand support structures, heat exchangers, vacuum pumps, tooling, and fluid components such as valves, reliefs, burst disks, tubing, etc.
Automate repetitive test operations to increase efficiency and safety.
Develop innovative processes to increase testing capability and rates, while maintaining high rigor of safety.
Identify and characterize system pitfalls and potential hazards then work to resolve such anomalies by collaborating with design engineers on improvements for test stands and flight hardware.
Operate test console and direct a team of technicians to execute test processes.
Analyze and review data to ensure that hardware is operating as expected utilizing numerical data analysis tools to interpret test results.
Develop, maintain, and execute integration and testing process, and collaborate with design engineers to improve hardware.
Act as a conduit for completing the resource management process, including: planning, parts, coordination, skilled labor coordination, process verification, etc.
Bachelor’s degree in an engineering discipline
1+ years of hands-on testing experience (experience from internships, clubs or other hands-on extra-curricular activities qualifies)
Master’s degree in Mechanical or Aerospace Engineering or equivalent experience
Experience in production and test systems
Hands on test and production facility, factory, or laboratory experience
Mechanical aptitude and experience
Demonstrated experience where quick-thinking and problem solving plays a critical role
Knowledge and/or experience in aerospace structural or mechanical or propulsion systems assembly and testing
Ability to utilize test instrumentation and control components: pressure transducers, thermocouples, RTDs, strain gauges, accelerometers, flow meters, load cells, relays, solenoid valves
Ability to solve problems calling for technical analysis

Nice-to-haves

CAD modeling (Unigraphics NX preferred) and Teamcenter, Novice skill level

Application prep

Use the role’s language and application details while tailoring your materials.

Keywords to mirror

pythonsql

Platform: greenhouse
Effort: quick

Benefits

Benefits detected in the listing.

Pto