Job description

Job Summary: The position of Electrical Engineer I in the Service Mobile Products Group will act as the primary medium between the Electrical design, Mobile Design and Engineering, Mobile Production and Mobile Project Management. This role would serve as both the in-house conduit and lead to capture, document, communicate, advise, and receive all related electrical information that exists and changes during the scope of the project. This person will closely follow and observe how the electrical design’s intentions become realized, applied, and implemented during Mobile Production. This engineer would provide practical, everyday knowledge and expertise in both understanding and communicating the questions and issues that always arise during pre-production, production, and post-production phases, as it pertains to the electrical wiring network. This person would ensure a keen and experienced eye is always focused on the soundness of the electrical wiring and device layout, the proficiency of the implementation and the quality of the testing and evaluation. Having this person consistently involved at different steps in the process will allow for a more comprehensive and informed approach to all aspects of the Mobile electrical designs that can be difficult to fully gauge due to the complex intricacies and nuances inherent in electrical wiring execution and the sometimes-large scale of such designs. Essential Responsibilities: • Engineer will work alongside Mobile Engineering, before Customer Approval Drawing submittal, to consult on the best locations of HV equipment, as well as assessing the accessibility of such equipment after installation and the ease of maintenance. • Ensure Mobile Production has the latest and most up to date revision of the electrical drawings as revisions occur, verifying that obsolete designs are not followed. • Be the primary lead in receiving proposed changes to the electrical drawings and assist in evaluating the received feedback on the drawings. • Assist the Chief engineer/Project Manager in communicating proposed changes to the electrical drawings to the customer and assist in evaluating the received feedback on the drawings from this said customer. • Work with the Service Production and Engineering teams in designing the most efficient and effective layout for routing the rigid, flexible conduit before installation of such. • Work with the Service Production and Engineering teams in designing the most efficient and effective layout of Junction Boxes before installation of such. • If deviations to the electrical drawings are proposed, by either this Engineer or another, before or during Mobile Production, assist in assessing, in conjunction with Mobile Engineering and Production teams, whether this deviation is warranted and presents a safer and more effective upgrade over the current design. • If such deviation proposed is agreed upon by all aforementioned parties, then this engineer will lead in capturing this proposed change and revising it on the design drawings. • Capture and document any changes or deviations from the electrical drawings before or during Mobile Production, as it pertains to the wiring and layout of the As-built Mobile. • Perform point-to-point wiring tests and other related tests on the electrical wiring network of the As-built Mobile as to ensure the integrity of the electrical layout and wiring design and the functionality of the Mobile. • Compare the results of the point-to-point wiring tests and/or other tests to the most recent version of the electrical drawings. • Update the electrical drawings, via AutoCAD, as needed, to match the As-Built Mobile. • Troubleshoot and resolve electrical wiring/design problems during Mobile Production. • Assist in determining the specifications of electrical and electronic devices that warrant unexpected procurement during Mobile production, as can happen with new projects. • Work alongside third-party test groups, advising on the nature of the electrical layout and wiring design and answering questions raised by this test group. • Verify results of the third-party testing group, as it pertains to the point-to-point wiring and the electrical and electronic device layouts. • Assist in verifying and corroborating the electrical functionality descriptions and instructions required for entry in the Post-Production Customer User Manuals Job Requirements: • Bachelor’s degree in electrical engineering • Minimum of 5yrs. Design in the electric power industry • Fundamental understanding of power systems and substation design • Ability to create and edit AutoCAD Electrical Drawings • Knowledge and experience with electrical relays, protection, and control

Requirements

Must-haves

This person would ensure a keen and experienced eye is always focused on the soundness of the electrical wiring and device layout, the proficiency of the implementation and the quality of the testing and evaluation.
Ensure Mobile Production has the latest and most up to date revision of the electrical drawings as revisions occur, verifying that obsolete designs are not followed.
Be the primary lead in receiving proposed changes to the electrical drawings and assist in evaluating the received feedback on the drawings.
Assist the Chief engineer/Project Manager in communicating proposed changes to the electrical drawings to the customer and assist in evaluating the received feedback on the drawings from this said customer.
Work with the Service Production and Engineering teams in designing the most efficient and effective layout for routing the rigid, flexible conduit before installation of such.
Work with the Service Production and Engineering teams in designing the most efficient and effective layout of Junction Boxes before installation of such.
If such deviation proposed is agreed upon by all aforementioned parties, then this engineer will lead in capturing this proposed change and revising it on the design drawings.
Capture and document any changes or deviations from the electrical drawings before or during Mobile Production, as it pertains to the wiring and layout of the As-built Mobile.
Compare the results of the point-to-point wiring tests and/or other tests to the most recent version of the electrical drawings.
Update the electrical drawings, via AutoCAD, as needed, to match the As-Built Mobile.
Troubleshoot and resolve electrical wiring/design problems during Mobile Production.
Assist in determining the specifications of electrical and electronic devices that warrant unexpected procurement during Mobile production, as can happen with new projects.
Work alongside third-party test groups, advising on the nature of the electrical layout and wiring design and answering questions raised by this test group.
Verify results of the third-party testing group, as it pertains to the point-to-point wiring and the electrical and electronic device layouts.
Assist in verifying and corroborating the electrical functionality descriptions and instructions required for entry in the Post-Production Customer User Manuals
Bachelor’s degree in electrical engineering
Minimum of 5yrs. Design in the electric power industry
Fundamental understanding of power systems and substation design
Ability to create and edit AutoCAD Electrical Drawings
Knowledge and experience with electrical relays, protection, and control

Nice-to-haves

None flagged.

Application prep

Use the role’s language and application details while tailoring your materials.

Keywords to mirror

accessibility

Platform: jazzhr
Effort: medium

Benefits

Benefits detected in the listing.

Vision