Electrical Engineer Principal/New Generation

What the role needs

• Job Posting End Date
• 10-30-2026 Please note the job posting will close on the day before the posting end date.
• Support development of electrical design-basis and equipment requirements (generators, transformers, switchgear, station service, UPS/DC, cabling).
• Assist with power system studies and data preparation (load flow, short‑circuit, protection coordination, arc‑flash, harmonics) under senior review.
• Review vendor drawings, technical bids, and RFx deliverables and prepare comments for senior engineers.
• Help prepare technical and procurement specifications and scope documents for proposals.
• Support OEM interfacing during procurement: submittal review, factory/field testing coordination, and lead‑time tracking.
• Provide construction and commissioning support: site inspections, cable/power testing, relay settings assistance, witness testing, and punch‑list follow‑up.
• Assist with protection relay settings, grounding design, cable routing, and MV/HV equipment testing.
• Ensure designs comply with relevant codes and standards (IEEE, NEC/NFPA70, ANSI, IEC) and assist with reliability/obsolescence tasks.
• Coordinate with mechanical, I&C, civil, and operations teams to resolve integration and SCADA/DCS interface items.
• Contribute to O&M documentation, spares lists, and lifecycle cost input.

From the employer

Job Posting End Date 10-30-2026 Please note the job posting will close on the day before the posting end date. Job Summary The Electrical Engineer will support gas, coal, renewable, and new-generation self-build projects by defining electrical design-basis requirements and supporting the technical specification, engineering, procurement, integration, and commissioning of power generation electrical systems. A required focus of this role is advanced knowledge of utility-scale power plant electrical systems and equipment, including generators, generator step-up transformers (GSUs), medium- and low-voltage distribution systems, switchgear, motor control centers (MCCs), protective relaying, grounding systems, black-start systems, auxiliary power systems, and grid interconnection requirements. This role collaborates with Architect & Engineering (A/E) and Engineering, Procurement & Construction (EPC) firms and coordinates with internal and external stakeholders to ensure electrical designs meet performance, reliability, maintainability, constructability, safety, cybersecurity, and regulatory requirements. The engineer will participate in RFx/OEM engagements, support self-build proposals, and provide construction, commissioning, startup, and lifecycle support across the generation portfolio. Job Description What you’ll do: Key Responsibilities Support development of electrical design-basis and equipment requirements (generators, transformers, switchgear, station service, UPS/DC, cabling). Assist with power system studies and data preparation (load flow, short‑circuit, protection coordination, arc‑flash, harmonics) under senior review. Review vendor drawings, technical bids, and RFx deliverables and prepare comments for senior engineers. Help prepare technical and procurement specifications and scope documents for proposals. Support OEM interfacing during procurement: submittal review, factory/field testing coordination, and lead‑time tracking. Provide construction and commissioning support: site inspections, cable/power testing, relay settings assistance, witness testing, and punch‑list follow‑up. Assist with protection relay settings, grounding design, cable routing, and MV/HV equipment testing. Ensure designs comply with relevant codes and standards (IEEE, NEC/NFPA70, ANSI, IEC) and assist with reliability/obsolescence tasks. Coordinate with mechanical, I&C, civil, and operations teams to resolve integration and SCADA/DCS interface items. Contribute to O&M documentation, spares lists, and lifecycle cost input. Knowledge & Skills Understanding of protection relays, CT/VT selection, relay coordination fundamentals. Basic skills in grounding, cable sizing, testing, and MV/HV equipment installation practices. Ability to interpret single‑line diagrams, schematics, wiring diagrams, and technical reports. Familiarity with power electronics for renewables and storage is a plus. Proficiency in MS Office; familiarity with scripting or databases is beneficial. Effective written and verbal communication for cross‑functional coordination. Working Conditions Approximately 25% travel, including day trips and overnight stays (up to a week or more). Work in both indoor and outdoor environments with exposure to heat, cold, noise, dust, fumes, and operating machinery. Mandatory safety gear required at generating stations: hard hat, eye/hearing protection, steel-toed shoes with heels and non-slip soles. Adherence to site-specific safety requirements is mandatory. What we’re looking for: Engineer Principal SG9 Education/Experience: Has typically acquired 8 or more years of related engineering experience along with a Bachelor s degree in engineering in a program accredited by ABET*; Or 6 years of related engineering experience along with a Master s or PhD in engineering from a program accredited by ABET*. Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico** is preferred for this position unless approval to waive this requirement is given by the organization s EVP. *ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Individuals with a Bachelor’s degree in Engineering Technology can satisfy this degree requirement, if they obtain a certified Professional Engineering (PE) license. Acceptable alternative: Bachelor’s degree in engineering (non-ABET) plus a Master s degree or PhD in engineering from a university with an ABET accredited Bachelor s program. ** Confirmation is preferred to ensure the PE obtained in Puerto Rico aligns with NCEES standards. ***VP or above may waive the requirement for a degree from a university with an Non ABET accredited program In addition: Experience across gas, coal, and renewable projects; commissioning experience on simple/combined‑cycle plants. Experience with battery storage, inverters, or utility interconnection practices. Working knowledge of simple‑ and combined‑cycle plant electrical systems, generator synchronization, and MV/HV equipment. Familiarity with power system study tools and analysis methods. Experience reviewing vendor drawings and RFx responses. Proficiency with electrical design/analysis tools (ETAP, SKM/PowerTools, CYME, MATLAB, AutoCAD/MicroStation, or equivalent). In addition to competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you re passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! American Electric Power (On-Site) #LI-Onsite #AEPCareers #ElectricalEngineer Compensation Data Compensation Grade: SP20-009 Compensation Range: $116,255.00 - $151,132.50 The Physical Demand Level for this job is: S – Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don t have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.